Mediocre diamond setting => 1 photo

 This is a great way of losing customers with this style of diamond setting! Let me explain why this setting is not acceptable.

                              ==========================

#1. The corners of the row of diamonds were not created with square corners, only 'rounded' sections.

#2. The beads were not of equal size throughout the gem setting areas.

#4. The metal in between the beads looks rough and should have been cut deeper.

#5. The diamonds are not of equal size in the corners.

#6. There are lines of unnecessary metal beside all of the diamonds.

#7.  The beads were not burnished anywhere to be seen.

#8. Why was there a small stone set beside a large stone?

#9. At the start of the curve of cutting, there was insufficient skill involved in the metal cutting.

#10. The stones were set first, thus leaving the lines of metal throughout the photo. The "pre-cutting" process would have resulted in a cleaner finish.

#11. There was no care in carving the metal around the diamonds.

=============================

  I would have given the stone setter a "Fail" if I were the instructor. Hoping that you concur with my observations.