How can a steel mandrel help you in setting stones?

 Before you read my 225th tutorial essay, here are a few more samples of a steel mandrel used in the gemstone setting.

                                                               

                                                            

In my experience, this was the only method in securing this rectangular stone. It proved to be rather successful.

 Ring mandrels are usually for sizing rings, now as well they can be used in "Bezel, Gypsy & Channel" settings. They can free up one or both of your hands, and you can get close to your work and see where the hammer should be touching. 

 One end of the mandrel can be secured to your bench while your 'free hand' can hold the hammer. 

 Some of my "descriptive" photos needed 3-4 hands, but as I only had 2, I tried to 'visually' explain my texts.

 You can easily use your riveting hammer or even the "Adjustable tension, of your Reciprocating Hammer".

  Now why the 'groove' in the mandrel? If the item you are setting has a protruding Culet for some reason. The 'fully rounded' mandrel will have no chance to save the Culet from damage or be ruined by the continuous downward hitting. You can also adjust the force of the 'hitting motion' to suit your taste with your hammer. 

  If you wish to use your 'reciprocating hammer', you can still use your steel mandrel, but now you have a 'free hand' to hold the many stones more securely. Even with any hammering, always check for the 'Culet' exposure.

  This steel mandrel is not only used for checking for finger sizes, but now it's another 'friendly' setting tool. 

 When setting stones in wax, the coolness of the steel mandrel keeps the wax cool at all times. When you are holding your wax in your fingers, the finger warmth will quickly distort (or ruin) the shape of your delicate wax frame.

 Even when keeping the wax for stone setting, the absolute roundness of the mandrel keeps the inside of the ring free of getting out of shape.

In this photo, I'm holding the wax on the mandrel while drilling holes.

 These photos are a collection of very thin wax set rings. There isn't any way I'd hold my fingers on the wax rings while wax setting the stones on these delicate wax rings, as I'd be asking for problems.

 When the setter is required to use the 'reciprocating hammer', always attempt to use the steel hammer as well. The reason is that there will be no collapsing of the 'setting gallery'.

 When the hammering (of any description) is used with a leather insert ring clamp, the leather absorbs all of the DIRECT HITTING FORCE.

 Therefore very little 'direct' hitting action is centred on the ring itself. ALL OF THE HITTING can be measured in "pounds per inch" of downward pressure and all of this will then be transferred to your ring.

Both styles of ring clamps have the same supporting problem, which is the thickness of the leather. Any hammering will not be useful to you.

 A steel mandrel can be also used as a 'third hand' when the moment arises, you can use a riveting hammer also for stone setting. You can easily rest your steel mandrel against your bench and then be totally 'hands-free'.

 I'll still use the steel mandrel for Channel Set rings, I need full 100% security while setting these Rubies.

 Both of my steel mandrels have 'grooves' in them in case any of the stones unexpectedly protruded "Culet Facets".

  I hope that I've succeeded in allowing you to see another setting tool. 

 REMEMBER, THAT THE LEATHER IN THE RING CLAMPS ABSORB THE 'HITTING FORCES'.

Gerrylewy18(at)gmail.com