Design "flaws" seen on a CAD rendering.

 I saw a picture of this ring on our own "Ganoksin" site. There are four things that I just can't ignore.

===============================

 1) The top stone has a very wide Bezel around the center diamond. Not to mention the Bezel is unappealing as compared the multitude of other stones.

2) Did I not mention that there isn't any "Bright-Cutting" around that stone either.

3) The multitude of smaller stones have oversized mini-claws. The 'viewers eyes' gravitate towards the claws, but not the diamonds.

4) Those CAD created claws are too large, in comparison to the very small diamonds.

================================

 These 4 facts are my own, but you might disagree with me. If this ring was for me, I'd request the CAD designer to start again...NOW!

 I even asked my wife if she liked it, her answer was an honest .... NO!